29 August 2017

M4000 BAS / M4000 FIT+ / M4000 TWIN

M4000 BAS
Automatic clearance control for standard plasma cutting machines


One of the most important components when cutting with plasma is the precise clearance control. The M4000 BAS system provides all required characteristics for a precise cut. The system adapts to all common cutting machines, regardless if new installations or retrofit. It consists of the Linear Drive Body BAS, the Guiding Rail with 220 or 350 mm stroke and the Operator Interface with a built-in arc control system, motor controller and operator panel. The operation of the M4000 BAS system is done by BAS Operator Interface and digital signals and can be operated manually or centrally via a CNC. The setting of pierce height and cutting height is in millimeter, the setting of pierce delay in seconds. The control of cutting height is done using the ARC voltage. The torch is protected using excellent 3D collision protection in the torch clamp and vertical collision detection.


M4000 FIT+
Oxy-Fuel Height Control System with Cutting Torch and Integrated Ignition


Fully integrated Oxy-Fuel Cutting System with Cutting Torch, Ignition, Height Sensing and Lifter all in one package. It fits on all carriages and works with all common CNC controllers on the market. Modular approach allows highest flexibility. Selection of best components ensures high cutting quality and productivity. Single or multi torch applications are possible. The M4000 FIT+ system Cut sheets up to 100 mm thickness when used with active height sensor and up to 300 mm with Splash Protector.


M4000 TWIN
Automatic clearance control for plasma and oxy-fuel cutting machines


The M4000 TWIN system is designed to work alternate with plasma and / or oxy-fuel cutting. The required accessories for parking and fast exchange of torches are available. It is suitable for cutting any kind of plasma specific material, where as the distance between plasma nozzle and work piece is measured and controlled by the arc voltage. The ring electrode measures the clearance to the metallic work piece during oxy-fuel cutting. Optional Cutbus® for automatic transfer of cutting parameters from the CNC to the Linear Drive. The torch is protected using excellent 3D collision protection in the torch clamp and vertical collision detection.